Filtersystemen voor perfecte metallografische preparatie

During cutting, various residual materials are produced from the specimen (chips) and from the cut-off wheel (wear/tear). To prevent these residual materials from entering the cooling water / waste water system or the pump mechanism, the use of filter systems is required. A suitable filter system with the correct mesh size, filter material and dimension has a significant influence on the cleanliness of the coolant.

Productvoordelen

• Various QPREP filter systems for different cut-off machines, from precision machines to floor standing machines.
• QPREP filter systems protect the cutting machine and thus increase its lifetime.
• The different mesh sizes of the filters offer an applicationoriented selection of the appropriate filter system for the corresponding recirculating cooling unit.

Aanbevolen toepassingen

• The use of a filter system keeps the coolant significantly longer clean and prevents damage to the pump and machine.

Filter fleece for belt filter systems

for belt filter system BFA 285

• Filter fleece roll, coarse, 150 μm, 100 m x 710 mm

for belt filter system BFA 100/130

• Filter fleece roll, coarse, 150 μm, 100 m x 420 mm

Filter Basket

Hanging basket made of stainless steel for the collection of the chip abrasion

• can be hooked into 45 liter recirculating cooling unit
• Dimensions (WxHxD): 140 x 80 x 200 mm

Kennis-databank

Wilt u meer weten over de verschillende procedures, bezoek dan onze uitgebreide Knowledge Base.

Ons Knowledge Base artikel over doorslijpen bevat:

• Typische methoden om materialen te prepareren
• De verschillende metallografische sectietechnieken
• Hoe een geschikte doorslijpschijf te kiezen