Search

Knoop hardheidsmeter

De serie Knoop hardheidsmeters "Qness" tilt de Knoop hardheidsmeting naar een geheel nieuw niveau. Onze high-end modellen van de laatste generatie combineren korte cyclustijden met maximale precisie. Functies zoals de 8-positie gereedschapswisselaar, uitgebreide software en connectiviteit via Qconnect maken deze Knoop hardheidsmeter serie de optimale keuze voor klanten die op zoek zijn naar de meest innovatieve producten op de markt.

Micro Knoop hardheidsmeter Testkracht bereik: 0.25 g – 62.5 kg

Macro Knoop hardheidsmeter Testkracht bereik: 0.3 kg – 3000 kg

Volautomatische Knoop hardheidsmeter Testkracht bereik: 0.3 kg – 3000 kg

.

Achtergrond informatie Knoop hardheidstest (DIN EN ISO 4545)

In 1939 ontwikkelden Knoop, Emerson en Peters de Knoop hardheidsmeting om een meer betrouwbare hardheidsmeting in dunne lagen mogelijk te maken. In principe lijkt het sterk op de Vickers hardheidsmeting. Hier wordt een ruitvormige diamantpiramide met een longitudinale randhoek van 172,3° en een transversale randhoek van 130° gebruikt als indringlichaam. Dit indringlichaam wordt op zijn beurt verticaal in een werkstukoppervlak gedrukt met een specifieke testkracht. Na het ontladen wordt de resulterende indrukking gemeten, en alleen de lange diagonaal d1.

De Knoop hardheid wordt dan berekend als het quotiënt van de testkracht en het projectiegebied van de indrukking.

De Knoop methode wordt alleen gebruikt in het kleine kracht (tot 10 N) en micro hardheidsbereik.

1. Indentation of the diamond pyramid with test force F into the test specimen

Indentation of the diamond pyramid with test force F into the test specimen

2. Measurement of the long diagonal d1 of the indentation

Measurement of the long diagonal d1 of the indentation

Knoop Hardness Test Results

Knoop Hardness Test Results

According to DIN EN ISO 6508-1 the result of a Knoop hardness test is indicated as follows:

700 HK 0.2 / 20   ⇒   Hardness value as per Knoop

700 HK 0.2 / 20   ⇒  Abbreviation for Knoop hardness

700 HK 0.2 / 20   ⇒   Test force specification: Test force [N] = 9.807 * test force specification

700 HK 0.2 / 20   ⇒   Application time of the test force (omitted if it is between 1-15 s)

Knoop hardheidsmeter - FAQ

What is a Knoop hardness tester used for?

A Knoop hardness tester is used to measure the hardness of brittle materials or thin sections, such as ceramics, glass, and coatings. It is particularly useful for materials that might crack or deform under heavier loads used in other hardness tests.

How does the Knoop hardness test work?

The Knoop test involves pressing a rhombic-shaped diamond indenter into the material's surface under a specific load. The length of the long diagonal of the indentation is measured, and the Knoop hardness number (KHN) is calculated based on the applied load and the indentation size.

What are the advantages of using a Knoop hardness tester?

The Knoop test is advantageous for its ability to test very small or thin samples and its suitability for brittle materials. It requires minimal sample preparation and provides precise hardness values with minimal risk of cracking the specimen.

How does Knoop hardness testing differ from Vickers hardness testing?

Both Knoop and Vickers tests use diamond indenters, but the Knoop indenter is elongated, producing an indentation with a longer diagonal, which is measured. Knoop is preferred for anisotropic materials and thin films, while Vickers is better for isotropic materials and thicker samples.

What factors can affect the accuracy of a Knoop hardness test?

Accuracy can be influenced by the surface preparation of the specimen, the precision of the indentation measurement, and the alignment of the indenter. Proper calibration and maintenance of the testing equipment are also crucial for obtaining accurate results.